Steps to Using a Freezing Tunnel to Clear Your Pipes

Steps to Using a Freezing Tunnel to Clear Your Pipes

Freezing tunnel is a sure way to clear your pipes that have clogged up and are filled with ice. There are a number of steps that you must follow in order to achieve a successful freeze and thus ensure that your pipe system will not get blocked up any more.

First, you need to stop the flow of water as it is the main reason why your system is clogged up. This can be achieved through applying pressure on the pipe and forcing the water to be diverted from the main pipe system. However, to do this, you need to install an anti-clogging device such as an anti-freeze collar and run it for a couple of minutes.

Once the collar has been installed, you need to place the clamp around the main pipe where the pipe is at the very top. The clamp should be placed so that it covers the top part of the main pipe and then lock it on to the clamp. After that, you need to place a block of ice on the pipe that can be safely and effectively frozen. To facilitate this, you can place a large sheet of ice on the end of the pipe and if possible, this can be also put under the clamp and secured tightly.

If the clog is large, you can install a pump to the clog pipe. You can install a PVC pipe inside the clog pipe and install a fan to circulate cold air over the pipe. At the same time, you need to use special valve and make sure that you can close the valve from outside so that there is no chance of the freezing tunnel to escape. The chances of leakage are low as the clog pipe is covered by a lid.

In order to keep the tunnel from freezing up in the future, you need to check the thickness of the clog in the pipe every time you clean the pipes. To do this, you need to blow out the freezing tunnel. At the same time, you need to check the depth of the clog and fix the clamp accordingly.

If the clamp and fan are working properly, you can try again until you get a freeze where the tunnel is frozen thick. This can be achieved by cutting off the flow of cold air and warm air for the next few days so that the tunnel will not freeze again.

A freezing tunnel is a quick and simple way to clear clogged up pipes that might be stuck on the pipes. The freezing tunnel is a cheap and easy way to cure clogs in your pipes as it only requires a few minutes to set up and the task itself is quite simple.

Tags:discount 500kg tunnel freezer | quick freeze tunnel in china | tunnel freezer quotation | tunnel freezing brands